外貿協會::五金展

PG series is a low-backlash planetary gear reducer with an output shaft, suitable for intermittent operation with high-positioning accuracy and high-sensitivity starting. High-quality tapered roller bearings are being used at the output end so as to afford heavier axial and radial loads.

此為帶輸出軸的低背隙行星式減速機，適合應用在高定位精度和高靈敏啟動的間歇式運轉。輸出端使用高品質的滾錐軸承，讓輸出軸可以承受更大的軸向和徑向負載。

Widely used in CNC machinery and automation industry. A high-precision and economical reducer.

泛用於CNC機械及自動化產業之減速機，是一款高精度且經濟型的減速機。

Specially designed machinery is able to eliminate clearance from gearbox inner and from between pinions and racks.

Driven by a single servo motor, enclosed mechanical preload system is more efficient than electrical preload system.

特別設計的機械結構，消除減速機內部及齒輪，齒條間的間隙，徹底解決一般減速機驅動齒輪齒條時，針對製造或安裝上的誤差所產生的背隙，給予彌補或消除。
 

可由單顆伺服馬達驅動，在電腦參數的設定上，比使用雙顆伺服馬達的電機消隙更為容易。

Specially designed with a mechanical structure eliminating the gap between the gears and racks inside the reducer and completely mitigate the backlash caused by manufacturing or installation errors when the general reducer drives the rack and pinion, and compensates or eliminates it.

Driven by a single servo motor, enclosed mechanical preload system is more efficient than electrical preload system.

The output flange is a plate design and easy to install or adjust.

特別設計的機械結構，消除減速機內部及齒輪，齒條間的間隙，徹底解決一般減速機驅動齒輪齒條時，針對製造或安裝上的誤差所產生的背隙，給予彌補或消除。

可由單顆伺服馬達驅動，在電腦參數的設定上，比使用雙顆伺服馬達的電機消隙更為容易。

輸出法蘭為板式設計，易於安裝調整。

Duplex lead worm is used. By the adjustment, reducers can be backlash-free.

Widely used on W axis of CNC moving beam gantry boring and milling machine.

使用雙導程蝸桿，藉由適度的調整，達到減速機無背隙。

泛用於CNC動樑式龍門搪铣床W軸上。

HG series is designed with a unique hollow output shaft available for the installation of a gear with fewer teeth and compatible with a smaller servo motor. Less torque is required to start operation, which produces higher economic benefits. HG series was awarded by Taiwan Excellence Award in 2016.

此減速機為獨特中空軸設計，輸出端可裝置較少齒數齒輪，伺服馬達可選用較小規格，獲得最小啟動扭矩，達到高經濟效益。HG系列榮獲台灣精品獎項肯定。

Spiral bevel gear and precision grinding gears, smooth teeth surface and high accuracy. High input speed. High strength and light-weight aluminum casing.

螺旋傘齒輪設計，精密研磨齒輪，齒面平滑精度高。高容許輸入轉速。直角齒輪箱採用高強度鋁合金設計，使輕量化。

High-precision grinding rack, accuracy DIN 6h25

Grinding after hardened tooth surface

M2~M12

精密級研磨齒條，精度DIN 6h25

齒面硬化處理後研磨

M2~M12

Excellent rigidity. High-quality taper roller bearings are used to sustain more radial and axial load.

High-duty material of taper roller bearing is sustained due to the enlarged plate design.

The output shaft of the reducer can bear the huge axial and radial load. This UM series is a perfect fit for heavy-duty, accuracy and durability machinery.

極佳剛性，使用大型高品質滾錐軸承，能承受更大的軸向和徑向的負荷。

加大盤面設計,使輸出軸能夠承受超大的輸出扭力，專為重負荷、高精密、耐久性的機械而設計製造的減速機。

The diameter of the slewing bearing can reach 2500mm, including both internal-toothed slewing rings and external-toothed slewing rings. The provision of standardized slewing bearings (CRE, CRI, BTE and BTI series) and customization is available. 

直徑可達2500mm，齒轉盤軸承及外齒轉盤軸承皆可以承製。提供標準化的轉盤軸承外(CRE，CRI，BTE，BTI系列)，也可依照客戶需求製作客製化。