外貿協會::五金展

Humidoflo^TM represents a new stage of respiratory care. It provides heated and humidified flow up to 70L/min via a wide broad nasal cannula.

With Humidoflo^TM, patient can eat, drink and communicate during therapy. This allows a comfortable, effective delivery of humidified continuous high flow gas, blended with O₂ up to 100%, creating an ideal solution for wide range of respiratory care patient.

Advantages:

Humidoflo^TM is a humidified high flow system designed to treat patient from ICU, EMS to long-term and palliative care with following features:

• Flow up to 70L/min are open for anesthesia purpose.
• Accurate provision of oxygen.
• Real time FiO2 display / FiO2 table installed.
• Real time temperature & flow display.
• Easy disinfection process.
• 3 stage alarm system.
• HR / SPO2 monitoring function.
• USB data collection.

The high flow therapy nasal cannula (HFNC), is a patient interface used to deliver supplemental respiratory gas or increased airflow to a patient in need of respiratory help.

The main function of the HFNC is used to deliver respiratory gas to both nostrils of the patient through the two-prong.

GREATFLOW^TM is a new alternative as it provides warmed humidified oxygen at high flow, and also has been shown to assist breathing and improve recovery.

In compare with Humidoflo^TM, GREATFLOW^TM is a combined system that includes an Air-Oxygen blender and a humidifier, providing a stable high flow oxygen source for hospital users. It is comfortable during use and more comfortable than standard (dry) oxygen via a facemask (Hudson type) or nasal prongs.

GGM NP Series infant Bubble CPAP system includes servo control humidifier, full range of nasal prong, bonnet, CPAP generator, heater wire circuit, pressure release safety valve.

Complete system for application of continuous positive airway pressure to neonates and infants by nasal prongs (NCPAP) administered with a heater wire circuit used in conjunction with a continuous flow source infant ventilator or a suitably equipped multipurpose ventilator.

The respiratory gas humidifier and accessories is a respiratory humidification system that is humidifiers (equipped with heater wire adapters, temperature probes), in combination with humidification chambers, breathing circuits, and patient interfaces.

The main function of the respiratory gas humidifier and accessories is to provide the optimal physiological temperature of 37°C and 100% Relative Humidity with 44 mg/L of Absolute Humidity for patients. For patients whose upper airways have been bypassed (invasive ventilation), the humidification output of the system can reach 33mg/L. For patients whose upper airways have not been bypassed (non-invasive ventilation), the humidification output of the system can reach 12mg/L.

Humidifier chamber is intended for use to hold water required to humidify the air being delivered to patients. Simply slides into position on the hot plate of the base controller allowing the inspiratory gas to pass over the heated water. This provides optimum humidification to the patient.

Full Range of heater wire circuits are designed to provide balanced humidity with patient safety and reliability in mind.

The heater wires heat the air in the circuits to prevent rainout and ensure continuous delivery of warm and humid air at and optimum level for the patients.

The Heat and Moisture Exchanger Filter (HME Filter), is a device to filter and maintain the moisture level of the respiratory gas from/to the patient.

The devices are used in the patient end. The main function is passive humidification through the heat preserved and moisture absorbed paper roll. Besides, HME Filter also has the function of filtration for the bacteria, virus, and particles through the filter media.

Bacterial & Virus filter is a device to filter the respiratory gas from/to the patient. The main function of the Bacterial & Virus filter is filtration for the bacteria, virus, and particles through the filter media.

GGM patent multi-dimension adjustment (MDA) forehead support series CPAP/BIPAP mask or sleep apnea masks are interfaces used with CPAP & BIPAP machines for treatment or therapy for people that suffer from obstructive sleep apnea & other related sleeping disorders. NIV mask applies to non-invasive ventilation.

Various accessories including test lung, water trap, connectors and exhalation valve are applied during ventilation therapy. Wide range of accessories is provided to adapt to ventilators and respiratory devices.