Feature Of Product

1. For producing precise micro springs, such as probe springs, medical catheters and so on.
2. Minimum wire diameter is Ø0.03mm.
3. Three-axis servo controlled, spring outside diameter, pitch and length can be changed simply by modifying program, it greatly shortens set up time.
4. Tool treatment technology is available for customer's choice, the production speed can be increased by 30~50% and tool life can be increased as well.
5. Complete peripheral equipment, such as vacuum parts collector, stereomicroscope and CCD profile magnifier.

Tool treatment technology

• Tools can be applied YHM's newest tech: UVw surface treatment. It can efficiently solve the problems during mass production, such as wire scraping and heat generation.

CF series (Wire diameter)  

CF-303 Ø0.03~0.4 mm

CF-308 Ø0.1~0.8 mm

CF-310 Ø0.1~1.0 mm

CF-320 Ø0.4~2.0 mm

CF-330 Ø0.4~3.2 mm

Vedio

Feature Of Product

1. A multi-functional machine which can produce compression springs, torsion springs and extension springs.
2. With 2 sets of feed roller which makes feed pressure steady and more suitable to form soft wire, like resistance wire or spring with small spring index.
3. Wide applications, including pen springs, battery springs, magazine springs, spiral springs, hair springs, zig zag springs, dental brace, fuse, extension springs, bi-metal springs, filaments, heater springs, wire formings, strip forming and other kinds of special springs.
4. Preciser and more stable than any other torsion spring machine on market and it is particularly suitable for producing micro torsion springs or special torsion springs.

CT series (Wire diameter)  

CT-208 Ø0.1~0.8 mm

CT-210 Ø0.15~1.0 mm

Vedio

Feature Of Product

1. This machine is multi-functional, it can produce precise small extension springs, small compression springs and small torsion springs in high speed.
2. With 2 sets of feed roller, the feeding force is more consistent and thus more suitable to form soft wire, like resistance wire or spring with small spring index.
3. Standardized tool.
4. It can not only produce extra long extension spring of any special hook, but also equips all function of CT series machine.

LE series (Wire diameter)  

LE-208 Ø0.2~0.8 mm

LE-210 Ø0.2~1.0 mm

Vedio

Feature Of Product 

1. Suitable for production of standard extension springs, English hook, German hook, Indian hook extension springs, with free length less than 100mm.
2. High production efficiency, the production speed of English hook spring is around 100~120 ppm, for German hook spring is around 60~80 ppm.
3. Standardized tool, suitable for mass production.
4. With hook sensor to sort NG parts.

EF series (Wire diameter)  

EF-210 Ø0.1~1.0 mm

Vedio

Feature Of Product 

1. Shaft winding system makes consistent diameter, particularly fits softer wire coiling, like magnetic wire or nickel chromium wire. 
2. With tool stamping and bending, spring angle is consistent and more accurate than touch probe; meanwhile the high productivity is suitable for mass production.  
3. Pitch is controlled by servo which makes set up easier and shortens set up time.

TF series (Wire diameter)  

TF-310 Ø0.1~1.0 mm

TF-320 Ø0.4~2.0 mm

TF-330 Ø1.6~3.0 mm

Vedio

Feature Of Product 

1. Suitable for production of precise air coils in high speed.
2. This machine can coil round wire, square wire and flat wire, to one layer or multi-layer.
3. Wound by spindle, spring diameter is consistent and stable.
4. With tool stamping and bending, spring angle is consistent and precise.
5. Pitch is controlled by servo which makes set up easier and shorten set up time.
6. Complete peripheral equipment, such as stripping machine, stripping sensor, hot air unit and soldering unit, all can be controlled by machine and can complete the production at a time.

PF series (Wire diameter)  

PF-320 Ø0.3~2.0 mm

PF-335 Ø0.4~3.5 mm

PF-350 Ø1.6~5.0 mm

Vedio

Feature Of Product 

1. Suitable for production of precise wire formings and strip formings in high speed.
2. Stamped by mold, parts dimension is precise.
3. Lower material consumption, compared with press machine.
4. Simpler mold design and easy to maintain.
5. Production speed is higher than spring former and the dimension is more accurate as well.
6. Modular design gives more flexibility in production, feeding direction can be changed according to production requirements.

FB series (Wire diameter)  

FB-210Ø0.1~1.0 mm, max strip width 10 mm, thickness 0.1~0.6mm

FB-220

Ø0.4~2.0 mm, max strip width 20mm, thickness 0.1~1.0mm

Vedio

Feature Of Product 

1. Cutting by stamping, cutting shape can be changed by stamping mold.
2. Suitable for making all kinds of snap rings and retaining rings.
3. With wave spring forming attachment, this machine can produce wave spring in high speed

PR series (Wire diameter)  

WSF-1Cross section area 0.75mm², max width 2mm, thickness 0.3mm

PR-13Cross section area 3mm², max width 3mm, thickness 1mm

PR-24Cross section area 8mm², max width 4mm, thickness 2mm

Vedio

Feature Of Product 

1. Suitable for production of complicate torsion springs.
2. It can make 3D forming; spring dimension and shape can be changed simply by adjusting the program.
3. Machine axis can be increased as per demand, maximum to 13 axis.
4. Two servo spinners can be added to make wire forming.

MF series (Wire diameter)  

MF-603  Ø0.05~0.6 mm

Vedio

Feature Of Product 

1. Wire bender FMB-2 is especially for 2 D wire bending, such as hook, supporter and other kinds of wire forming. 
2. CNC wire bender's tools are standardized, easy ro setup and operation.
3. FMB-2 is equipped with a board plane which access to add customization, such as chamfering, heating advice and etc.

FMB series (Wire diameter)  

FMB-1 Ø0.6~2.0 mm

FMB-2  Ø1.0~4.0 mm

FMB-3 Ø2.0~6.0 mm

Vedio