外貿協會::五金展

Special twister thread design provides Low Driving Torque and High Holding Power!

Materical: Carbon Steel、 Stainless Steel
Application: Chipboard、Melamine、MDF board、Wood、PVC
Size: M3 - M8、#5 - 5/16
Length: 16 - 400mm、5/8" - 15 3/4"

We can provide a customized service (including size, head style, head recess, point, and surface treatment) to solve you problems.

Features:

• Patent Spiral countersunk head design，provides easy and clean countersinking without burrs and mushrooming.
• Patent Twister thread design，reduces installar fatigue and increase the working efficiency. Additionally, it minimizes battery loss in power drivers.
• Low driving torque and high holding power，reduces the wood split even close to the edge.

Fast drilling for hardwood and hard gysum board without pre-drill requirement!

Material: Carbon steel、Stainless Steel
Application: Hardwood (IPE)、hard gypsum board、 plasterboard
Size: M3 - M8、#5 - 5/16
Length: 25 - 400mm、1" - 15 3/4"

We can provide a customized service (including size, head style, head recess, thread type, and surface treatment) to solve you problems.

Features:

• Patent Magic Spiral Countersunk head are able to remove wood chips instantly and provides a perfect countersunk with clean and flush, without burrs.

• Special Reamer thread and Sharp point quickly grabs and fast drills into hardwood, hard gypsum board and plasterboard without pre-drilling requirement. Moreover, it avoids wood split even close to the edge with low driving torque. Save time and money.

Magic Spiral Head Provides Easy and Clean Countersinking without Burrs!

Material: Carbon steel、Stainless steel
Application: Wood、Hard Gypsum Board、Melamine Board、MDF、PVC、Rubber、Hydropanel
Size: M3 - M8、#5 - 5/16

We can provide a customized service(including size, head recess, thread type, point and surface treatment) to solve you problems.

Features:

•  Provides a perfect countersunk with clean and flush, without burrs.
•  Significantly reduces the time and the cost of installation.     
•  Maintains the good appearance of the application and increases the safety of surface while the installers touch the material.

The special 12-V-Ribs under head designed for use in all fiber cement board, and provide a smooth surface.

Material: Carbon steel、Stainless Steel
Application: fiber cement board to wood or light gauge steel framing
Size: M3 - M8、#5 - 5/16
Length: 9 - 300mm、3/8" - 11 3/4"
Point: #1-#6 drilling point (with wings tek)

We can provide a customized service(including size, head style, head recess, thread type, point and surface treatment) to solve you problems.

Features:

• Different than traditional aggressive ribs, our special v-ribs and cutting teeth under head design provides a perfect countersunk with clean and flush, without burrs.
• No pre-drilling requirement with drilling point or with wings tek.
• Starts easily and drives with less torque.

FP GⅡ was designed special thread and point for drywall screw with fast and stable.

Material: Carbon steel、Stainless steel
Application: Gypsum board、drywall、Wood、Plywood、 Fiberboard、 Light Gauge Steel、Collated Screws
Size: #5 - 5/16、M3 - M8
Length: 3/8" - 15 3/4"、9 - 400mm

We can provide a customized service (including size, head style, head recess,  thread, and surface treatment) to solve you problems.

Features:

G2 was designed for drywall screw with special thread and point provids

• GII special thread and point features a speedy and stable.
• Wide material application is including wood to steel, light gauge steel to gypsum board.
• Instead of drill point because it is able to drill light gauge steel up to 1.6mm max thickness.

Hex-star recess is a leading-edge drive system. With the particular bit can stick fit well and stable, and star and hex bits are also working. Hex-Star screws not only reduce physical fatigue, but also extend the product life.

Materical: Carbon Steel、 Stainless Steel

We can provide a customized service (including size, head style, head recess, point, and surface treatment) to solve you problems.

Features:

• Fit well and Stable without wobbling and cam-out.
• High Torsion reduce bit fracture and extends the bit life.
• Better Driving for load-bearing material and save your enegy.
• Convenience for extra advantage. Star/six lobe and Hex bits are also available for Hex-Star recess.

SCR is a leading-edge drive system with the unique stability design without wobbling and cam-out.

Materical: Carbon Steel、 Stainless Steel

Size:

We can provide a customized service (including size, head style, head recess, point, and surface treatment) to solve you problems.

Features:

• Stick Fit bit fits drives tight & Stability without wobbling and cam-out.
• Better Driving high torques to save your energy without end load in the driven requirement.
• Unaffected by Coating no need to design differences of drive deeps for different coatings and easy to control the quality
• Low Cost

Ultimate Torsional Strength Test

• Comparing with phillips、square、torx、ph-sq recess drives, SCR screw provides better driving, high torques.

FP T-Hidden clips with screws are your easy way for fastener decking solution. They can work with several types of decking boards to provide perfect and clean finished look.

Materical: 

• T-Hidden Clip: Nylon_ Eco-friendly (Color can be customized)
• Decking Screw: C1022、10B21 Carbon Steel Screw、302、304、305、316, Stainless Steel Screw

Application: Decking、Grooved Board

• With Sharp point screw can connect decking board with timber.
• With Drilling point screw provides decking board connecting with Aluminum frames (Max. 2.0mm).

Size: 

• T-Hidden Clip: 

• Decking Screw: M4 - M4.2 and below

Length: 16 - 400mm、5/8" - 15 3/4"

Features:

• Comes with T-Hidden clips and decking screws set, increased your work efficiency 
• T-Hidden clip can customized color with head painting screw
• Povides an clean and unblemished finish look
• 90 degree installation, easy and quick
• With ribs design can reduce sliding and avoid crimping, tight and stability

Save Your Time and Money with Our Revolutionary Design, FP Countersink Drill Bit.

Application:

Wood、Hardwood、WPC board、Rubber、Plastic、Aluminum board

Drill Bit Application Range:

#6 - #14、M3.8 - M6.5

Features:

1. Special Tip Design- able to drill varied materials.
2. Drilling without chips stuck
3. Replaceable Stop Chunk without Burning, Marking or scratching on the surfaces
4. Adjustable Depth Stopper
5. No Burr and Mushrooming
6. Longer Product Life- 30-40% longer compared to others

FP Cutting bits, Sharp-Cut Thread and Hi-Lo Thread, were designed for cutting drywall for electrical boxes, air vents and others with fast, clean and low cost.

Materical: Carbon Steel C1022

Application: Gypsum Board

Size:

Max. RPM: 30,000RPM

Features:

• Gives a piloted tip for making easy and clean cut-out switch boxes, air vents and others.
• Low cost for using in drywall.
• Perfect choice for DIY marketing.