外貿協會::五金展

Current natural gas and gas pipelines are pre-buried by projected usage. If the amount of gas users saturates due to an increase in the number of users, it will be easily caused the pipe diameter is too small to provide enough.Therefore, gas boosting is actually very important for the industrial or commercial use of natural gas.   The MRG series of gas torch boosters produced by our company is currently widely used in restaurant kitchen or glass industry manufacturing process.

For details, please refer to the following URL

https://www.blowtac.com.tw/en/category/Rotary-Vane-Type-Blower/A13.html

APPLICATIONS

• Waste water treatment aeration

• Aquaculture aeration

• Air transportation

• Natural gas or bio-gas booster.

• Vacuum transportation

• Vacuum packing

• Vacuum coating

• Vacuum dehydration

• Smoke suction

• Dust collection

For details, please refer to the following URL

https://www.blowtac.com.tw/en/category/Rotary-Vane-Type-Blower/A13.html

Submersible Mixers

Compact design. More efficient bulk flow. The angular contact ball bearing resists to axial force submersible mixers.

For details, please refer to the following URL

https://www.blowtac.com.tw/en/category/Submersible-Mixers/A08.html

Submersible Jet Aerators

The BLOWTAC submersible ejector or venture type jet aerators is an economical solution of water aeration, mixing of pond, aquaculture, municipal, industrial wastewater treatment. They have the features of easy installation, low power consumption and high Oxygen transfer rate. The BOD is easy to be removed for wastewater treatment and the good mixing and stirring effect makes uniform MLSS due to the fine bubbles convention. Also, they are low noise and low cost for construction and maintenance. There are JA for stand-alone installation and T-JA rail guide fitting system for selection.
The power is from 1/2Hp to 71/2Hp and designed to aerate at the water depth 1.5M to 4 m without any blower to push air into the water. The vortex impeller and special designed venture chamber makes less blocking situation and high effective aeration.
We offer OEM manufacturing with high reliability and stability of performance, efficient and effective satisfaction of client. Let JA and T-JA series submersible ejector or venture type jet aerators be the best choice of your solution.

For details, please refer to the following URL

https://www.blowtac.com.tw/en/category/Submersible-Jet-Aerators/A07.html

Floating Jet Aerators

The Surface Jet Aerator is horizontal aerator is used in pretreatment for mixing, secondary and tertiary treatment for oxygen transfer and aquaculture aeration. During the propeller rotates to create the negative pressure, the air is drawn into the shaft and dispersed it into the water in a horizontal direction. The air past the propeller and mix with the fluid will establish micro and high velocity bubbles into the water.

For details, please refer to the following URL

https://www.blowtac.com.tw/en/category/Floating-Jet-Aerators/A09.html

For details, please refer to the following URL

https://www.blowtac.com.tw/en/category/Oil-Free-Mini-Air-Compressors/A03.html