外貿協會::五金展

Register Now
Register Now

JIMMAO INTERNATIONAL CORP.

4F-1, NO.34, LANE 170, SUNG CHIANG RD. TAIPEI, TAIWAN 10459

About us

Our Story

Everyone deserves access to cleaner air. 

The story of the Bionic Cube goes back to 2012. Our team of aviation engineers were involved with installing some of the first bi-polar ionization devices into private aircraft. Over the following seven years, we watched as the installation and retrofitting of air conditioning systems in aircraft and public buildings using this technology became more understood, widespread, and proven.

In 2020, worldwide awareness of the need for better indoor air quality intensified. We naturally pivoted to our experience in this area. In January 2020, we started designing the first Bionic Cube prototypes.

Sketches of the Bionic Cube
Our first prototype with a handmade metal housing
Different versions of prototypes

Because of the solid reputation and long legacy of laboratory-backed ionizers, we leveraged our previous experience and knowledge of this technology. Using available off-the shelf components to house the plasma ionizers, we produced the first Bionic Cube concepts. 

It was a moment of success to have our first portable unit! We rushed these prototypes out to family members involved in healthcare, as well as those with health conditions. In those quarantine and lockdown times, we weren’t content to sit by idly when there was a clear opportunity for us to help improve indoor air quality.

The impact was immediately obvious. Our family noticed a measurable improvement in the air quality inside their homes. But, we couldn’t stop there! We continued to refine the design and materials to bring the very best solution to market.

Our Story

Everyone deserves access to cleaner air. 

The story of the Bionic Cube goes back to 2012. Our team of aviation engineers were involved with installing some of the first bi-polar ionization devices into private aircraft. Over the following seven years, we watched as the installation and retrofitting of air conditioning systems in aircraft and public buildings using this technology became more understood, widespread, and proven.

In 2020, worldwide awareness of the need for better indoor air quality intensified. We naturally pivoted to our experience in this area. In January 2020, we started designing the first Bionic Cube prototypes.

Sketches of the Bionic Cube
Our first prototype with a handmade metal housing
Different versions of prototypes

Because of the solid reputation and long legacy of laboratory-backed ionizers, we leveraged our previous experience and knowledge of this technology. Using available off-the shelf components to house the plasma ionizers, we produced the first Bionic Cube concepts. 

It was a moment of success to have our first portable unit! We rushed these prototypes out to family members involved in healthcare, as well as those with health conditions. In those quarantine and lockdown times, we weren’t content to sit by idly when there was a clear opportunity for us to help improve indoor air quality.

The impact was immediately obvious. Our family noticed a measurable improvement in the air quality inside their homes. But, we couldn’t stop there! We continued to refine the design and materials to bring the very best solution to market.

Products

Bionic Drive (AC Mounted Air Purifier)

The Bionic Drive is a fixed position installation capable of treating a typical 2400 CFM AC system (Typical 4 to 6 Ton System) and depending on the ducting may only require one unit. The unit is mounted in the discharge AC ducting after the coils and inlet air filter. Input power accepted is from 110 to 240 VAC, 50/60 Hz.

 

Bionic Cube (Portable Whole Room Air Purifier)

Bionic Cube is a portable, whole room, filterless air purifier that uses the same core industrial grade bipolar ionization technology found in many commercial buildings and hospitals. This simple-to-use device can help purify the air in your immediate surrounding and larger spaces beyond that. And it’s completely ozone-free.